HAFCO METALMASTERHM-48
Mill Drill - Geared & Tilting Head
  • 1 of 26
    HM-48
  • 2 of 26
    Left View
  • 3 of 26
    Tilting Head
  • 4 of 26
    Control Panel
  • 5 of 26
    Digital Tilting Head Gauge
  • 6 of 26
    Milling Head & Quill Handle
  • 7 of 26
    Digital Quill Depth Stop
  • 8 of 26
    Spindle Speed Controls
  • 9 of 26
    Speed Chart
  • 10 of 26
    Power Feed X Axis
  • 11 of 26
    Vertical Power Feed Motor
  • 12 of 26
    Manual Vertical Fine Feed Handle
  • 13 of 26
    Table Limit Switch
  • 14 of 26
    Motorised Head Safety Lock
  • 15 of 26
    Aluminum Motor
  • 16 of 26
    Swivel Head Adjustment
  • 17 of 26
    Dovetail Slide
  • 18 of 26
    Quill Depth Stop Gauge
  • 19 of 26
    Height Micro Limit Switch
  • 20 of 26
    Dial Graduations
  • 21 of 26
    Keyed Drill Chuck
  • 22 of 26
    Halogen Light
  • 23 of 26
    Flexible Coolant Hose
  • 24 of 26
    On Off Switch
  • 25 of 26
    Drawbar
  • 26 of 26
    Includes These Accessories
HM-48
Mill Drill - Geared & Tilting Head (240V)
(X) 540mm (Y) 185mm (Z) 410mm
Dovetail Column
HAFCO METALMASTER
ex GST
inc GST
$3,990.00
$4,588.50

CODE
M126
Model
HM-48
Digital Readout
Optional
Column Type
Dovetailed
Table Size
820 x 240mm
Spindle Taper
3MT
Longitudinal Travel (X-axis)
540mm
Cross Travel (Y-axis)
185mm
Vertical Travel (Z-axis)
410mm
Spindle to Table
490mm
Spindle Travel
120mm
Spindle to Column
273mm
Swivel Head (Left - Right)
±90º
Drilling Capacity
31.5mm
End Milling Capacity
28mm
Face Milling Capacity
80mm
T-Slot
14mm
Work Table Capacity
55kg
Spindle Speed (steps / rpm)
6 (95-1600rpm)
Motor Power
1.5kW / 2hp
Motor Voltage
240V
Overall Height
1550mm
Weight (Nett)
430kg
Features
  • Gear driven head with 6 speeds
  • Dovetailed vertical Z-Axis
  • Pendant control with swivel arm
  • Tilting head to ±90º from vertical with digital display
  • Large 820 x 240mm ground work table with T-slots
  • Adjustable leadscrew nuts eliminating backlash on both axis
  • Fine feed hand wheel operating quill feed
  • Digital depth display with zero reset for quill
  • Digital tilting head gauge
  • Longitudinal X-Axis power feed
  • Motorised head for Z-Axis travel
  • Forward and reverse on/off switch
  • 3MT spindle with 75mm diameter lockable quill
  • Adjustable table and drill length stops
  • Metric dial graduations @ 0.05mm for X & Y-Axis
  • Rear slide-way cover and slide clamps on all axis
  • Table lock on both axis
  • Heavy duty cast iron stand with coolant tray
  • Includes coolant system, swarf tray & work light
Includes
  • Cast iron stand
  • Coolant system
  • X-Axis power feed unit
  • Motorised vertical head motor
  • Halogen light
  • Digital depth display
  • Digital tilting head gauge
  • Drill chuck & arbor
  • Multi-point facing cutter & arbor
  • Safety cutter guard
Product Brochure
 
Tell a friend about HM-48 Mill Drill - Geared & Tilting Head
Friend's Name:
Friend's Email:
Your Name:
Your Email:
Add a note (optional):

  • HM-48 (M126)
CODE
Model
Digital Readout
Column Type
Table Size
Spindle Taper
Longitudinal Travel (X-axis)
Cross Travel (Y-axis)
Vertical Travel (Z-axis)
Spindle to Table
Spindle Travel
Spindle to Column
Swivel Head (Left - Right)
Drilling Capacity
End Milling Capacity
Face Milling Capacity
T-Slot
Work Table Capacity
Spindle Speed (steps / rpm)
Motor Power
Motor Voltage
Overall Height
Weight (Nett)
Price (ex GST)
Price (inc GST)