HAFCO METALMASTERAL-280P
Lathe Mill Drill Combination
  • 1 of 20
    AL-280P
  • 2 of 20
    Tailstock
  • 3 of 20
    Longitudinal Feed Handle
  • 4 of 20
    Saddle
  • 5 of 20
    Swivel Compound Vice
  • 6 of 20
    Auto Feed Egnagement Lever
  • 7 of 20
    Thread Selection Lever
  • 8 of 20
    Lathe Spindle Speeds
  • 9 of 20
    Control Panel
  • 10 of 20
    Thread and Feed Chart
  • 11 of 20
    Belt and Gearbox Drive System
  • 12 of 20
    Swivel Drill Head Lock Lever
  • 13 of 20
    Lathe or Drill Engagement
  • 14 of 20
    Drill and Mill Head
  • 15 of 20
    Quill Lever with Fine Adjustment
  • 16 of 20
    Quill Graduations
  • 17 of 20
    Drill Mill Spindle Speeds
  • 18 of 20
    Drill Chuck Guard
  • 19 of 20
    Lathe Chuck Guard
  • 20 of 20
    Leadscrew Cover
AL-280P
Lathe Mill Drill Combination (240V)
400 x 409mm
HAFCO METALMASTER
ex GST
inc GST
$1,850.00
$2,127.50

CODE
L159
Model
AL-280P
Lathe Specifications
Lathe Specifications
Tool Height To Suit
12mm
Distance Between Centres
409mm
Swing Over Bed
400mm
Swing Over Cross Slide
300mm
Centre Height
200mm
Spindle Bore
20mm
Spindle Nose Type
Fixed
Bed Width
140mm
Tailstock Taper
3MT
Cross Slide Travel
115mm
Compound Slide Travel
85mm
Leadscrew
Metric
Longitudinal Feed (z)
0.05-0.17mm/rev
Metric Thread Range
0.2-3.0mm
Imperial Thread Range
8-120TPI
Three Jaw Chuck Size
100mm
Four Jaw Chuck Size
Optional
Spindle Speeds
7 (160 - 1360rpm)
Motor Power
0.55kW / 0.75hp
Voltage
240V
Mill Specifications
Mill Specifications
Spindle Taper
3MT
Mill / Drill Speeds
14 (125 - 1190rpm)
Work Table
150 x 200mm
Motor Power
0.55kW / 0.75hp
Voltage
240V
Machine Dimensions (LxWxH)
92 x 58 x 105cm
Weight (nett)
220Kg
Features
  • Ideal for either the home hobby, or light engineering workshop
  • The drill head swings 90ยบ in both directions and has 14 spindle speeds
  • Fine micro down feed is incorporated for milling operations
  • Quick action spindle engage system transferring drive from lathe to mill
  • Milling vice incorporated within compound slide
  • Metric and imperial screw cutting
  • Power long feed on saddle
  • 3MT spindle and tailstock
  • Chuck guards for lathe and drill chuck
  • Sheet metal leadscrew cover
Includes
  • 3-jaw chuck
  • 4-jaw chuck back plate
  • Dead centre
  • Keyed drill chuck & arbor
  • Set of change gears & toolbox
Product Brochure
 
Parts List
1.21 MB
Tell a friend about AL-280P Lathe Mill Drill Combination
Friend's Name:
Friend's Email:
Your Name:
Your Email:
Add a note (optional):